'Amun' wire work pendant video tutorial

In this tutorial, I will show you how to create a wire woven pendant, using simple wrapping techniques to set an undrilled focal cabochon using woven wire components. We’ll use the same base wires throughout the project. I’ll show you how to securely hold your focal stone in place, create a simple bail, and incorporate accent beads to enhance your design. Finally, I’ll show you how to finish off your wire work for a polished look. Hope you have fun with it! 

A printable PDF tutorial for this can be found here

A full kit including all the materials I have used can be found here

Full weave library and stone setting PDF tutorial

What you will need to make this design:

Wire:

• 7 m of 0.3 mm (28 ga) wire
• 1 m of 0.4 mm (26 ga) wire
• 2 m of 0.8 mm (20 ga) square wire

Gemstones & beads:

• 16 to 18 mm pear gemstone
• 4 x 2.5 mm copper beads
• 4 x 3 mm copper beads
• 1 x 4 mm copper beads

Tools required:

• Fine tipped flush cutters 
• Chain nose pliers 
• Round nose pliers 
• Bent nose pliers (optional)